Skip to content

Install

Releases are marked pre-release on the releases page.

Package install

Download the .deb and SHA256SUMS from one release, check, then install:

sha256sum -c --ignore-missing SHA256SUMS
sudo apt install ./Roomtone_0.1.0_all.deb
roomtone-setup --dry-run   # then: roomtone-setup install

Depends on linux-theater-dsp — install that one first.

The package puts files under /usr only. Its install and remove scripts do not enable or start services, do not write into any home folder, and do not touch CamillaDSP or PipeWire configuration; the roomtone-setup command above does the per-user part, and --dry-run shows what it would do first. Details, the other repositories' packages, and the one-command installer are in the main repository's packaging notes.

Just the calibration tool

To use only the calibration tool and web page without the system package:

pipx install git+https://github.com/praveenchandrahas/Roomtone

This gives the autocal and autocal-web commands (the project is not on PyPI).

What was checked before this release

Written with an AI assistant; checked against simulated rooms and REW exports; used and checked by the author in his own room (one room, one author). No external or second-person validation yet. The packages are unsigned. CI installs and removes them in a clean Ubuntu 24.04 container; the packaging itself has not been run on the author's own rig.

Adapting it to your system

The calibration file in data/mic/ belongs to one microphone (the author's Dayton iMM-6S); replace it with your own, or run with --mic-cal=none. The REW exports in data/rew/ are from one room, and paths and channel names in the kits assume the author's 5.1.2 layout and interface unless you provide a layout file — see Speaker layouts.

Safety. The sweeps and tone tests play loud, sustained low frequencies: start low, keep the sub away from your ears; high-level tones can damage drivers.

Next: set up your speaker layout (five minutes), then see Usage for running a measurement.